BATTERY CARE
Battery Handling
Avoid metal surfaces, metal tools, bracelets, jewellery, wire leads, etc. that may accidentally short-circuit the battery terminals
- Do not drop or mechanically deform the battery as this may short-circuit the battery internally and cause fire
- It is recommended that the battery be checked for mechanical damage before use
- Damaged batteries may leak a corrosive fluid. If damaged, handle with protective goggles and gloves. Avoid contact with eyes and skin
- Do not simultaneously handle both terminals of the battery. Under normal conditions, a battery voltage less than 40v. is not considered dangerous. A voltage above 40v. can be fatal
Battery Storage
Store all batteries in a cool, dry environment (0-25°c preferred) away from flammable vapours and gasses- Nickel cadmium batteries will slowly self-discharge with time, but may be stored either charged or discharges without damage
- Sealed lead acid, nickel metal hydride and lithium ion batteries will self-discharge, but must not be allowed to become fully discharged. It is recommended that these batteries be recharged every six months
Battery Charging/Testing
- Battery charging and discharge testing must only be carried out by trained technicians following manufacturers' instructions
- Batteries will release hazardous materials and/or explode if overcharged, over-discharged or damaged
Battery Shelf Life
- Rechargeable batteries supplied by Euro Energy Resources are recommended to be installed within two years of the date of manufacture, subject to sealed lead acid, nickel metal hydride and lithium ion batteries being stored in a cool environment and fully recharged every six months